22.1.2015

Runko muodostuu lauta kerrallaan...Hull planking, one plank at the time

Runkolaudoitus etenee ja veneen runko saa muotonsa. Runkolaudat tuodaan parittain veneen viereen varastosta jossa ne liimataan yhteen. Tyypillinen runkolauta koostuu kahdesta lankusta. 

Valmiin runkolaudan kok.pituus on noin 12-13 metriä. Tälläisen laudan käsittely on aikaa vievää puuhaa...Höylä on ovensuussa josta lauta menee "pihalle" ja tulee takaisin jotta molemmat puolet tulevat höylättyä. Tämän jälkeen lauta veistetään muotoonsa ja tarvittavat kolot työstetään steeviin ja perärankaan. 

Lopuksi laudan päät laitetaan höyry-pasutukseen jonka jälkeen lauta laitetaan paikoilleen puristimilla. Ruuvit ja niitit sinetöivät laudan lopullisesti paikalleen.

Tällä hetkellä sovitetaan kolmatta lautaparia. Yhteensä lautapareja tulee 9 / puoli.
-------------------------------------------------------------------------------------------------------------------------

Hull planking is progressing one plank at the time...A pair of planks is first brought inside and glued together by the boat. A most common hull-plank will be glued of two planks. This will have a total length of about 12-13 meters. 

The plank is fed through a horizontal plane after it's been glued. The plane is set by the doorway so the plank coming out of the plane goes outside, gets flipped around and fed back in.

A template is drawn and transferred on the actual plank and once the shape is cut out the ends of the plank are steamed in a box so that they can be bent to shape.

Once it settles the final fastening is done with screws and rivets.

Right now we are up to the third pair of planks. In total there will be nine planks / side



Ensimmäinen lauta on paikallaan !! The first plank !!




Laudan pää taipuu. This illustrates how the end of the plank bends into its' desired shape.


Ensimmäinen lauta keulasta katsottuna. From the bow.



Lautojen liimaus veneen vierellä. Glueing of the planks.




Toinen lautapari asettuu paikalleen. Second plank fixed to the right position.


Lautojen välissä oleva puuvillaköysi kastetaan tervan ja mehiläisvahan seokseen. A cotton twine is set between the lapped planks. This twine is dipped in to a secret mix of tar and bee-wax...


Kohta ollaan peräpeilissä asti. Reaching almost up to the transom.